Wagner Paint-N-Roll Plus Uživatelský manuál stáhnout pdf (Strana 5)

5

English

3. Cleanup

Start

Returning excess material to material container

Cleaning the Paint N Roll™

1. Pull plunger back to draw

remaining material from

the roller arm assembly

into the tube.

1. Remove ll tube from the container

lid. Install end of the ll tube into the

valve housing.

4. Remove the roller arm. Submerge

the head of the Paint N Roll™ and

the ll valve and pull the plunger in

and out a minimum of 5 times.

2. Submerge the ll tube into the

appropriate cleaning solution

and pull the plunger in and out a

minimum of 5 times.

5. Clean the remaining parts (cap,

core, cover and spatter guard) by

hand using the appropriate cleaning

solution.

3. Remove the ll tube. Submerge the

ll valve and roller arm and pull the

plunger in and out a minimum of 5

times.

2. Press the ll valve

onto the ll tube. Push

plunger forward to return

excess material into the

container.

3. Remove the spatter

guard. Press locking tab

and remove roller cover

assembly from the roller

arm.

4. Remove the roller cap.

Push the roller core out

the other end. Place

spatter guard, cap, core

and cover in a bucket of

the appropriate cleaning

solution.

Before you begin cleaning:

When cleaning the Paint N Roll™, make sure

to use the appropriate cleaning solution for the

type of material used.

• If you used latex-based materials, use

warm, soapy water to clean the Paint N

Roll™.

• If you used oil-based materials, use mineral

spirits.

You will need:

• A large bucket or other container that will

hold cleaning solution.

TIP: A large laundry tub lled with warm,

soapy water is ideal for cleanup if you used

latex-based materials.

1

x5

1

4

x5

2

5

x5

3

2 3 4

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře